HSD
5801H0056 _______________________________________________________________ 66/181
3.5 STORAGE
If the product is to be stored, it must be protected against the weather, moisture, dust and
aggressive atmospheric and environmental agents.
It is therefore necessary:
• to carry out periodic checks to ensure the good general condition of conservation;
• to manually rotate the shaft (roughly once a month) to maintain optimum lubrication of the
bearings.
STORAGE TEMPERATURE: from 5°C (+41°F) to +55°C (+131°F)
RELATIVE HUMIDITY (NON-CONDENSING): from 5% to 55%
Maximum storage time for an HSD product is 12 months.
Beyond this limit it is necessary to review the state of the product.
For further information contact HSD Customer Service (see section 13).
To Next Page
Loading...
