● Stop bits: 1
● Parity: None
● Flow control: None
In COM
N
,
N
indicates the serial port number, and the value is an integer.
Step 4 In the navigation tree, choose Session.
Step 5 Select Connection type in Serial, as shown in Figure 8-40.
Figure 8-40 PuTTY Conguration
Step 6 Click Open.
The PuTTY window is displayed.
Step 7 Enter a user name and password.
If the login is successful, the server host name is displayed on the left of the
prompt.
----End
Huawei Servers
Troubleshooting 8 Common Operations
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 167
To Next Page
Loading...
