Huawei E9000 - Page 42

The default username of the switching plane is admin, and the default password
is Huawei12#$.
Software Tools
mini-sftp-server.exe: used to transfer
les between dierent platforms, for
example, from a switch module to a PC. This tool is third-party software. You need
to prepare it by yourself.
Procedure
Step 1 Congure an SFTP server.
For details, see 8.21 Using SFTP to Transfer Files.
Step 2 Log in to the MX210 or MX220.
For details about how to access the FC switching plane CLI, see 8.15 Logging In
to a Server Over a Network Port by Using PuTTY or 8.17 Logging In to a
Compute Node, Passthrough Module, or Switch Module by Using the SOL
Function of the MM910.
Step 3 Run the ipaddrset command to set the management IP address and then run the
ipaddrshow command to check whether the IP address is correct.
● IPv4
FC_SW:admin> ipaddrset
Ethernet IP Address [10.77.77.77]:
10.32.53.47
Ethernet Subnetmask [255.255.255.0]: 255.255.240.0
Fibre Channel IP Addresss [none]:
Fibre Channel Subnetmask [none]:
Gateway IP Address [0.0.0.0]: 10.32.48.1
DHCP [O]:
IP address is being changed...Done.
FC_SW:admin> ipaddrshow
FC_SW:admin> ipaddrshow
Ethernet IP Address: 10.32.53.47
Ethernet Subnetmask: 255.255.240.0
Fibre Channel IP Addresss: none
Fibre Channel Subnetmask: none
Gateway IP Address 10.32.48.1
DHCP:
O
● IPv6
FC_SW:admin> ipaddrset -ipv6 --add fd00:60:69bc:82:205:33:fed7:f6fe/64
IP address is being changed...Done.
FC_SW:admin> ipaddrshow
SWITCH
Ethernet IP Address: 10.20.24.55
Ethernet Subnetmask: 255.255.240.0
Gateway IP Address: 10.20.16.1
DHCP:
O
IPv6
Autoconguration Enabled: No
Local IPv6 Addresses:
static fd00:60:69bc:82:205:33:fed7:f6fe/64 preferred
IPv6 Gateways:
fe80:21b:3d:fe0b:7800 fe80:21b:ed:fe0b:2400
Huawei Servers
Troubleshooting 4 Collecting Information
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 33