Huawei E9000 - Page 55

Table 5-5 SAS/SATA drive status indicators
Drive Active
Indicator
Drive Fault
Indicator
Meaning Diagnosis
Steady green O The drive is
operating properly.
N/A
Blinking green Data is being read
from or written to
the drive.
Steady green Blinking yellow The server is
locating the drive
or rebuilding RAID.
Blinking green
Steady green,
blinking green, or
o
Steady yellow The drive is faulty. Log in to the
iMana 200 or
iBMC and use
FusionServer
Tools Toolkit or
Smart
Provisioning to
check the drive
faults.
O O The drive is faulty
or not detected.
Check whether
the drive is
connected, or log
in to the iMana
200 or iBMC and
use FusionServer
Tools Toolkit or
Smart
Provisioning to
check the drive
faults.
Table 5-6 NVMe drive indicators
Drive Active
Indicator
Drive Fault
Indicator
Meaning Diagnosis
Steady green O The NVMe drive is
detected and
working properly.
N/A
Blinking green at
2 Hz
Data is being read
from or written to
the NVMe drive.
O The NVMe drive is
not detected.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 46