Huawei E9000 - Installing the Chassis

Indicator Status Meaning Diagnosis Procedure
LOM port
connection status
indicator
Steady
green
The network port is
connected properly.
N/A
O The port is not in
use or is faulty.
1. Connect the port
to another switch
and network
cable to check
whether the
original switch
and network
cable are normal.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Table 5-10 FlexIO card indicators
NIC Type
Chip
Mode
l
Port Status Network
Status
Operation
SM210
FlexIO card
(4 x GE
electrical
ports)
5719 Active Blinking
yellow
Data is
being
transmitted
on the
network.
N/A
O No data is
being
transmitted
on the
network.
1. Connect the port
to another switch
and network cable
to check whether
the original switch
and network cable
are normal.
2. Check whether the
NIC is operating
properly.
Link Steady
green
The network
connection
is normal.
N/A
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 55