Huawei E9000 - Page 63

Indicator Status Meaning Diagnosis Procedure
O The network port is
not connected.
1. Connect the port
to another switch
and network
cable to check
whether the
original switch
and network
cable are normal.
2. Check whether
the switch is up.
Data transmission
status indicator for
a GE electrical
port
Blinking
yellow
Data is being
transmitted.
N/A
O No data is being
transmitted.
1. Connect the port
to another switch
and network
cable to check
whether the
original switch
and network
cable are normal.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Connection status
indicator for a GE
electrical port
Steady
green
The network port is
connected properly.
N/A
O The network port is
not connected.
1. Connect the port
to another switch
and network
cable to check
whether the
original switch
and network
cable are normal.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 54