Indicator Available Only on the E9000
Table 5-14 MM910 management module indicators
Indicator Status Meaning Diagnosis
Power indicator
(PWR) on the
MM910
Steady green The MM910 has
been powered on.
N/A
Blinking green The MM910 is
being powered
on.
O The MM910 is not
powered on.
Check whether
the MM910 is
installed properly.
Health status
indicator (HLY) on
the MM910
Steady green All components
inside the chassis
are operating
properly.
N/A
Blinking red (once
every second)
A major alarm is
generated for a
component in the
chassis. The
indicators on both
the active and
standby MM910s
are red.
Check whether
the MM910 is
installed properly
and log in to the
HMM WebUI to
view alarms.
Blinking red (four
times every
second)
A critical alarm is
generated for a
component in the
chassis, and the
indicators on both
the active and
standby MM910s
are red.
Blinking red (ve
times every
second)
The MM910 is not
installed properly.
O The MM910 is not
powered on or is
being powered
on.
N/A
Active/standby
status indicator
(ACT) on the
MM910
Steady green The MM910 is
active.
N/A
O The MM910 is in
standby mode.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 67
To Next Page
Loading...
