Huawei E9000 - Installing a Half-Width Compute Node

Indicators Available only on the X6000, X6800, and X6800 V5
Table 5-13 Aggregated network port indicators
Indicator Status Meaning Diagnosis Procedure
Aggregated
network port link
indicator
Steady
green
The network port is
connected properly.
N/A
O The network port is
not connected.
1. Connect the port
to another switch
and network
cable to check
whether the
original switch
and network
cable are normal.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Aggregated
network port
active status
indicator
Blinking
orange
Data is being
transmitted over the
network port.
N/A
O The network port is
idle.
1. Connect the port
to another switch
and network
cable to check
whether the
original switch
and network
cable are normal.
2. Check whether
the ports on the
switch and NIC
are up.
3. Check whether
the NIC is
operating
properly.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 66