Huawei OceanStor V5 Series - Page 139

Table 6-3 Indicators on the front panel of a controller enclosure
No. Indicator Status and Description
1 Running/Alarm
indicator on a
BBU
● Steady green: The BBU is fully charged.
● Blinking green (1 Hz): The BBU is being charged.
● Blinking green (4 Hz): The BBU is being
discharged.
● Steady red: The BBU is faulty.
2 Running/Alarm
indicator on a
fan module
● Steady green: The fan module is working properly.
● Steady red: The fan module is faulty.
● O: The fan module is powered o.
Figure 6-124 shows the indicators on the rear panel of a controller enclosure.
Figure 6-124 Indicators on the rear panel of a controller enclosure
1 Running/Alarm indicator on a
power module
- -
Table 6-4 describes the indicators on the rear panel of a controller enclosure.
Table 6-4 Indicators on the rear panel of a controller enclosure
No.
Indicator Status and Description
1 Running/Alarm
indicator on a
power module
● Steady green: The power module is working
properly.
● Blinking green: The power input is normal but the
device is powered o.
● Steady red: The power module is faulty.
●
O: There is no external power input.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 130