Figure 8-6 Removing the panel
Step 3 Remove cables connected to the left and right sides of the MCB, as shown in
Figure 8-7.
When removing cables, label the cables with corresponding terminal ports for later
connection.
Figure 8-7 Removing cables
Step 4 Push the black clip of the MCB outwards. Then remove the MCB along the inner
side of the PDC, as shown in Figure 8-8.
PDU8000 Modular Precision PDC V2.0
User Manual 8 Maintenance Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 125
To Next Page
Loading...
