Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the air duct. For details, see 7.13 Removing the Air Duct.
Step 8 Remove all fan modules. For details, see 7.15 Removing a Fan Module.
Step 9 Press and hold down the latches on both sides of a fan module bracket, and lift the bracket.
Use the same method to lift the other fan module bracket. See steps (1) and (2) in Figure
7-127.
Figure 7-127 Removing fan module brackets
Step 10 Locate the cables connecting the mainboard and the front disk backplane to the DVD-ROM
driveand the VGA board, and disconnect the cables from the mainboard and the front disk
backplane. For details, see 2.7 Internal Cabling.
Step 11 Lift the bolt that secures the tray. See step (1) in Figure 7-128.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 243
To Next Page
Loading...
