Figure 7-131 Installing fan module brackets
Step 11 Install the fan modules. For details, see 7.16 Installing a Fan Module.
Step 12 Install the air duct. For details, see 7.14 Installing the Air Duct.
Step 13 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 14 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 15 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 16 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
With Eight 2.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the VGA board to be replaced. For details, see 7.55 Removing the VGA Board.
Step 3 Take the spare VGA board out of its ESD bag.
Step 4 Insert the VGA board into the tray. See step (1) in Figure 7-132.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 247
To Next Page
Loading...
