Figure 7-132 Installing the VGA board on a server with eight 2.5-inch hard disks
Step 5 Tighten the screws to secure the VGA board to the tray. See step (2) in Figure 7-132.
Step 6 Connect cables to the VGA board.
Step 7 Push the tray into the chassis in the arrow direction. See Figure 7-133.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 248
To Next Page
Loading...
