RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Copyright © Huawei Technologies Co., Ltd.
The SSL Encrypted Transmission is Enabled by default, as shown in Figure 4-41. If it is set
to Disabled, the RCCMD certificate controls will not be displayed on the page, as shown in
Figure 4-42. If the SSL Encrypted Transmission is set to Disabled, a message indicating
there is a risk will be displayed.
Figure 4-41 SSL encrypted transmission enabled by default
Figure 4-42 SSL encrypted transmission disabled
Event Configuration
The SNMP card supports 17 alarm events, and a maximum of 50 jobs can be added for each
event, as shown in Figure 4-43.
Figure 4-43 shows the buttons on the Event Configuration page, and Table 4-7 describes
these buttons.
To Next Page
Loading...
