Huawei Smart String ESS LUNA2000-200KWH-2H1 - Personnel Requirements

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
1 Safety Information
Issue Draft (2022-10-30)
Copyright © Huawei Technologies Co., Ltd.
3

Do not touch the equipment while it is in use, as the enclosure is hot.

If there is a likelihood of personal injury or equipment damage during operations,
immediately stop, report the case to the supervisor, and take feasible protective measures.

Evacuate from the site immediately once the fire alarm horn/strobe is triggered.

During the operation and maintenance of the equipment, if you need to leave temporarily,
close and lock the cabinet doors.

During transportation, transfer, installation, cable connection, and maintenance, comply
with the national and local laws, regulations, and relevant standards.

The materials and tools prepared by the customer must comply with the national and local
laws, regulations, and relevant standards.

Obtain approval from the national and local electric utility company before connecting the
equipment to the grid.

Before opening container doors during the installation, operation, and maintenance of the
equipment, clean up any water, ice, snow, or other foreign objects on the top of the
container to prevent foreign objects from falling into the container.

Do not perform reverse engineering, decompilation, disassembling, disassembly, adaptation,
implantation, or other derivative operations on the equipment software. Do not study the internal
implementation of the equipment, obtain the source code of the equipment software, steal
intellectual property rights, or disclose any of the performance test results of the equipment software.

You are advised to prepare a camera to record the installation, operation, and maintenance of the
equipment.
1.2 Personnel Requirements

Only qualified personnel are allowed to operate the equipment, including transportation,
transfer, installation, cable connection, and maintenance. Wear personal protective
equipment (PPE) when operating the equipment.

Operators must pass the Company's training and have professional knowledge of energy
storage systems.
For specific qualification requirements, see local laws, regulations, and industry standards.