LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Copyright © Huawei Technologies Co., Ltd.
Battery charge: The Smart Power Control System (also referred to as Smart PCS) is
connected to the rack controller and send commands to charge batteries.
Battery discharge: When the grid power is insufficient for the loads, the system controls
the batteries to supply power to the loads through the Smart PCS.
Features
The ESS consists of the power supply and distribution system, monitoring system,
environment control system, and fire suppression system. It features safety, reliability, fast
deployment, low cost, high energy efficiency, and intelligent management.
Pack-level optimization
1. This design fully leverages the module capacity in the battery racks.
2. Battery packs can be directly replaced by onsite personnel without the need for
professional technicians or manual SOC calibration, reducing the replacement time.
2.3 Appearance
Figure 2-2 Appearance and dimensions
To Next Page
Loading...
