Huawei Smart String ESS LUNA2000-200KWH-2H1 - B Repainting the Equipment

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
B Repainting the Equipment
Issue Draft (2022-10-30)
Copyright © Huawei Technologies Co., Ltd.
155
B Repainting the Equipment
Prerequisites

Do not repaint the equipment under poor weather conditions, such as rain, snow, strong
winds, and sandstorms, when there is no shelter outdoors.

You have prepared the paint according to the color palette included with the equipment.
Repainting Description
The equipment should be intact. If the paint peels, repaint the area.
Check the damaged area and prepare the appropriate tools and materials.
Table A-1 Repainting description
Paint Damage
Tools and
Materials
Procedure
Description
Slight scratch (steel
base material is
intact)
Spray paint or paint,
fine sandpaper,
anhydrous alcohol,
cotton cloth, and
brush (required for
repainting a small
area) or paint gun
(required for
repainting a large
area)
Steps 1, 2, 4, and 5
1. For the color of
the finish coat
(acrylic acid
paint), see the
included color
palette and the
Pantona number.
2. For a few
smudges,
scratches, or rust,
manual paint
spraying or
brushing is
recommended.
3. For many
scratches or
large-area
smudges and
rust, use a paint
gun to spray
Smudges and rust
that cannot be
removed
Deep scratch
(primer damaged,
steel base material
exposed)
Spray paint or paint,
zinc-rich primer,
fine sandpaper,
anhydrous alcohol,
cotton cloth, and
brush (required for
repainting a small
area) or paint gun
(required for
repainting a large
Steps 1, 2, 3, 4, and
5