LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Copyright © Huawei Technologies Co., Ltd.
2.7.2 Forklift Requirements
Do not move the ESS after battery packs are installed.
Before using a forklift, ensure that the forklift has a load bearing capacity of at least 1 t.
It is recommended that the length of the tynes be greater than or equal to 1.2 m, the
width be 80 cm to 160 cm, and the thickness be 25 cm to 70 cm.
2.7.3 Hoisting requirements
Before hoisting, ensure that the crane and hoisting ropes meet the load-bearing
requirements.
When installing or removing the hoisting equipment, do not drag it on the container to
prevent scratches.
Do not hoist or move the ESS after battery packs are installed.
Crane hoisting capacity > 1 t, working radius ≥ 2 m If the onsite
environment does not meet the required working conditions, ask a
professional to assess the conditions.
Only trained and qualified personnel are allowed to perform hoisting
operations.
Check that hoisting tools are complete and in good condition.
Ensure that the hoisting tools are secured to a load-bearing object or
wall.
The weather condition should be good without wind when the unit
needs to be hoisted outdoors.
Ensure that the crane and steel hoisting ropes provide the required
bearing capacity.
All doors of the equipment are closed and locked.
Ensure that the steel hoisting ropes are securely connected.
It is recommended that the container be hoisted from left to right or
from right to left.
Do not allow any unauthorized person to enter the hoisting areas and
do not stand under the crane arm.
Ensure that the crane is properly located and avoid long-distance
hoisting.
Keep the container stable and horizontal during hoisting, and ensure
that the diagonal gradient of the container is less than or equal to 5
degrees.
Ensure that the angle between two ropes is less than or equal to 90
degrees.
Lift and land the container slowly to prevent shock to equipment
inside it.
To Next Page
Loading...
