LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Copyright © Huawei Technologies Co., Ltd.
− Keep your body steady.
− Do not climb higher than the fourth rung of the ladder from the top.
− Keep your center of gravity between the side rails, and do not overreach to the
sides.
Drilling Holes Nearby the Equipment
Drill holes at proper positions to ensure that no short circuit is caused.
Wear protective equipment such as safety goggles and protective gloves when drilling
holes.
When drilling holes, protect the equipment from shavings. After drilling, clean up any
shavings.
Moving Heavy Objects
When moving heavy objects, ensure that the number of operators meets the requirements
as shown in the following figure and make proper preparations.
Wear protective gloves and anti-smashing shoes when manually moving the equipment.
Do not scratch the equipment surface or damage components or cables when moving the
equipment.
When transporting the equipment using a forklift truck, ensure that the forks are properly
positioned so that the equipment does not topple. Before moving the equipment, secure it
to the forklift truck using ropes. When moving the equipment, assign dedicated
personnel to take care of it.
Move the equipment with caution to prevent collision or fall.
1.7 Battery Safety
Statement
The Company shall not be liable for any damage to battery packs caused by the following
reasons:
The battery packs are not charged as required during storage, resulting in capacity loss or
irreversible damage to the battery packs.
Mechanical damage, leakage, and breakage result from improper operations or incorrect
connection of battery packs.
After being installed and connected to the system, the battery packs are not powered on
in time, which causes damage to the battery packs due to overdischarge.
Battery packs are damaged because they are not accepted in time due to reasons
attributed to the customer.
Battery pack running parameters are incorrectly set.
To Next Page
Loading...
