LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Copyright © Huawei Technologies Co., Ltd.
The ground conductor is reliably connected to
the ground terminal board or copper bar of the
container.
3.1.3 Smart PCS Installation Check
Refer to the LUNA2000-100KTL-M1 Smart Power Control System User Manual.
The Smart PCS is not deformed or damaged.
The bottom is securely fixed.
The Smart PCS is properly installed.
The clearance around the Smart PCS meets requirements.
Check that the upstream DC switch and downstream AC switch are OFF.
All cables are intact and free from any damage or cracks.
All ground cables are connected securely and reliably.
All AC power cables are connected correctly and securely, and there is no open
circuit or short circuit.
All DC cables are connected securely in correct polarity, and there is no open
circuit or short circuit.
The communications cables are connected correctly and securely.
The AC maintenance compartment is clean and tidy, without foreign matter.
The DC maintenance compartment is clean and tidy, without foreign matter.
The AC maintenance compartment door is closed and the screws on the door are
tightened.
The DC maintenance compartment door is closed and the screws on the door are
tightened.
The waterproof plugs on the unused USB and COM ports are secured.
3.1.4 SACU Installation Check
For details, see the SmartACU2000D Smart Array Controller User Manual (with No PID
Module).