Huawei Smart String ESS LUNA2000-200KWH-2H1 - System Power-On; Check before Power-On; General Check

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
3 System Power-On
Issue Draft (2022-10-30)
Copyright © Huawei Technologies Co., Ltd.
96
3 System Power-On
3.1 Check Before Power-On
3.1.1 General Check
No.
Check Item
Expected Result
1
Appearance

The equipment is intact and free from rust or paint flake-off.
If paint flakes off, repaint the equipment.

The labels on the device are clear. Damaged labels must be
replaced.
2
Cable
appearance

Cable sheathings are properly wrapped and not damaged.

Cable hoses are intact.
3
Cable
connections

Cables are connected in the designed positions.

Terminals are prepared as required and securely connected.

Labels on both ends of each cable are clear and specific, and
attached in the same direction.
4
Cable routing

Electrical and ELV cables are routed separately.

Cables are neat and tidy.

Cable tie joints are evenly cut without burrs.

Cables are placed properly and with slack at bending points
to avoid stress.

Cables are routed neatly without twists or crossovers in the
cabinets.
5
Battery pack
copper bar
The copper bar is not deformed, and the plastic dip coating is
not damaged.
6
Switch

The DC LV Panel switch is set to OFF.

The battery rack switch is set to OFF.