LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Copyright © Huawei Technologies Co., Ltd.
Personal Protective Equipment (PPE)
2.8.1.2 Pre-installation Check
Checking the Outer Packing
Before unpacking the equipment, check the outer packing for damage, such as holes and
cracks, and check the equipment model. If any damage is found or the equipment model is not
what you requested, do not unpack the product and contact your dealer as soon as possible.
You are advised to remove the outer packing within 24 hours before installing the equipment.
If the cabinet is higher than 2 m, take protective measures for working at heights during
unpacking.
Checking Deliverables
After unpacking the equipment, check that the deliverables are intact and complete, and free
from any obvious damage. If any item is missing or damaged, contact your dealer.
For details about the number of accessories delivered with the equipment, see the Packing List in the
packing case.
2.8.2 Installing the ESS
Step 1 Remove the baffle plate from the bottom of the ESS.
To Next Page
Loading...
