Huawei Smart String ESS LUNA2000-200KWH-2H1 - Installing Battery Pack Cables

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
2 Product Description
Issue Draft (2022-10-30)
Copyright © Huawei Technologies Co., Ltd.
82
Figure 2-66 Connecting cables
----End
2.9.3 Installing Battery Pack Cables
Step 1 Install copper bars for battery packs, and connect the battery rack general output power cable
and black start cable.

One ends of the battery rack general output power cable and black start cable are preinstalled before
delivery.

There are four types of copper bars delivered with the product: A, B, C, and D.

Copper bar D must be installed before copper bar B.

There are two types of M10 nuts for securing copper bars. Select a 15 mm or 16 mm socket based on
the site requirements.

When installing a nut, manually insert the nut into the screw plate, and then use a socket wrench to
completely secure the nut in place. This prevents the screw thread from being stuck or stripped due
to the deviation of the nut position.