LUNA2000-200KWH-2H1 Smart String ESS
User Manual
Copyright © Huawei Technologies Co., Ltd.
Figure 2-80 Removing external mechanical parts
Step 2 Remove the optical cable fastener.
Figure 2-81 Removing a fastener
Step 3 Connect one end of the optical jumper to the fiber adapter.
Step 4 Route the other end of the optical jumper through the cable hole on the side of the ATB, and
connect the cable to the ATB.
Step 5 Connect the peripheral optical cable to the ATB, splice the optical cable and the optical
jumper, and then wind the spliced cable around the fiber spool on the ATB.
To Next Page
Loading...
