Huawei Smart String ESS LUNA2000-200KWH-2H1 - Page 113

LUNA2000-200KWH-2H1 Smart String ESS
User Manual
4 SmartLogger Web-based Deployment
Issue Draft (2022-10-30)
Copyright © Huawei Technologies Co., Ltd.
106

When the IP address of the WAN port is in the network segment from 192.168.8.1 to 192.168.8.255,
set the default gateway to 192.168.8.1 and the IP address of the LAN port to 192.168.3.10. If the
connected port is a LAN port, you need to adjust the network configuration of the PC.

It is recommended that the PC be connected to the LAN port of the SmartLogger or the GE port of
the SmartModule. When the PC is connected to the GE port of the SmartModule, adjust the network
configuration of the PC to the configuration mode when the PC is connected to the LAN port of the
SmartLogger.
Step 3 Set LAN parameters.

If the SmartLogger is connected to a local area network (LAN) and a proxy server has
been set, you need to cancel the proxy server settings.

If the SmartLogger is connected to the Internet and the PC is connected to the LAN, do not
cancel the proxy server settings.
1. Open Internet Explorer.
2. Choose Tools > Internet Options.
3. Click the Connections tab and then click LAN settings.
4. Clear Use a proxy server for your LAN.
Figure 4-1 LAN settings
5. Click OK.
Step 4 Log in to the SmartLogger WebUI.
1. In the address box of a browser, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the IP
address of the SmartLogger) and press Enter. The login page is displayed. If you log in