Huawei UPS5000-E-30 kVA-FM - Equipment Operating Environment

● When moving the equipment by hand, wear protective gloves to prevent
injuries.
● Move or lift the equipment by holding its handles or lower edges. Do not hold
the handles of modules (such as power supply units, fans, and boards) that
are installed in the equipment because they cannot support the weight of the
equipment.
● Avoid scratching the cabinet surface or damaging cabinet components and
cables during equipment transportation.
● When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
● Choose a road with good conditions or sea for transportation to ensure
equipment safety. Avoid tilt or jolt during transportation.
● Move the cabinet with caution. Any bumping or falling may damage the
equipment.
1.6 Equipment Operating Environment
The UPS is used for commercial and industrial purposes only. It cannot be used as
a power supply for life support devices.
For power supply systems that are critical to
signicant economic interests or
public order, such as the national computing center, military command system,
emergency command center, railway signal system and control center, civil
aviation and air
trac control center, airport command center, nancial clearing
center, and transaction center, the Tier 4 or 3 power architecture specied in
TIA-942 must be used. That is, two power supplies must be used to supply power
to loads.
Ensure that the equipment is used in an environment that meets the product
design
specications (including power grid, temperature, and humidity).
Otherwise, the equipment may become faulty, and the resulting equipment
malfunction and component damage are not covered under the warranty.
The UPS operating environment must meet the requirements for the climate
indicator, mechanically active substance indicator, and chemically active substance
indicator in ETSI EN 300 019-1 class 3.6.
UPS5000-E-(30 kVA–120 kVA)-FM
User Manual 1 Safety Information
Issue 03 (2022-01-30) Copyright © Huawei Technologies Co., Ltd. 10