EasyManua.ls Logo

Huawei UPS5000-E-30 kVA-FM - Installation Environment

Huawei UPS5000-E-30 kVA-FM
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 3-1 UPS dimensions (unit: mm)
(1) Front door (2) Foot (3) Caster (4) Base
(5) Rear panel (6) Base installation
hole
(7) Beam (8) Side beam
3.1.1.2 Installation Environment
● Do not install the UPS in an environment where the operating temperature
and relative humidity are beyond the ranges stipulated in the technical
specications.
● Install the UPS away from water sources, heat sources, and ammable or
explosive materials. Keep the UPS away from direct sunlight, dust, volatile
gases, corrosive materials, and air dense with salt particles.
● Do not install the UPS in environments with conductive metal scraps in the
air.
● The optimal operating temperatures for valve-regulated lead-acid batteries
(VRLA batteries) are 20–30°C. Operating temperatures higher than 30°C
UPS5000-E-(30 kVA–120 kVA)-FM
User Manual 3 Installation
Issue 03 (2022-01-30) Copyright © Huawei Technologies Co., Ltd. 45

Table of Contents