Huawei UPS5000-H Series - Application Scenario

Green
● Space is eciently used. The UPS saves space for placing more IT equipment
and reduces the footprint by 50% compared with traditional solutions of
combining cabinets.
● The power density of power modules can reach 100 kW/3 U, which is the
highest in the industry.
● High
eciency is ensured even with a low load rate. If the load rate is
extremely low, the intelligent rotation hibernation technology ensures
redundancy and improves the UPS
eciency.
Intelligent
The iPower fault warning function is supported. If a battery, capacitor, fan, or any
other key component fails, a warning is generated to prevent the fault from
escalating.
Safe
● UPS power and control modules use redundant design. No single-point fault
occurs.
● The UPS supports a wide input voltage range of 138–485 V AC (line voltage)
to adapt to poor power grids.
● The UPS has an output power factor (PF) of 1.0, which is suitable for linear
and non-linear loads with a PF greater than 0.5. This allows the UPS to
connect to more loads and reduces customer investments.
● The UPS passes reliability tests which focus on high temperature, high
humidity, and dust adaptation. The impact of environment on the UPS
reliability is reduced.
2.3 Application Scenario
The UPS5000-H is suitable for power systems in various indoor scenarios,
including large-sized data centers or communications centers, equipment rooms of
large-sized enterprises, equipment rooms of
nancial systems, industrial
automated equipment, and scheduling centers.
Table 2-1 Typical UPS
congurations
Item
Application Scenario Description
Single UPS Supplies power to common loads. N/A
Parallel system Supplies power to large-sized
equipment rooms or important
loads. It features high reliability and
strong transient overload resistance
capability.
A maximum of four
UPSs can be connected
in parallel.
UPS5000-H-(400 kVA-600 kVA)
User Manual (100 kVA Power Module) 2 Product Overview
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 17