Huawei UPS5000-H Series - Starting the Inverter

To Next Page

To Previous Page

7.1.2 Starting the Inverter

Starting the Inverter on the LCD

Step 1 Choose Common Functions > Inv. ON.

NO TE

You can also start the inverter by choosing System Info > Maintenance > Inv. ON.

Step 2 On the displayed login screen, select a user name and enter the password.

Step 3 In the displayed dialog box, tap Yes to start the inverter.

----End

Starting the Inverter on the WebUI

Step 1 Open a browser (Internet Explorer 11 as an example) and choose Tools > Internet

Options.

Step 2 Click the Advanced tab, check that Use TLS 1.0 and Use TLS 1.1 are selected, and

click OK.

Figure 7-2 Setting Internet options

Step 3 In the address box of the browser, enter https://

UPS IP address

Step 4 Enter the correct user name and password and click Login.

Step 5 To ensure system security, change the preset password after login.

Step 6 On the WebUI, choose Monitoring > UPS System > Running Control, and click

Inv. ON, and conrm the operation to start the inverter.

UPS5000-H-(400 kVA-600 kVA)

User Manual (100 kVA Power Module) 7 System Commissioning

Other manuals for Huawei UPS5000-H Series