Huawei UPS5000-H Series - Installing a Cabinet

Context
NO TICE
● Only trained personnel are allowed to move the UPS. Use a forklift to transport
the UPS case secured to a wooden pallet to the installation position.
● To prevent the UPS from falling over, secure it to an electric forklift using ropes
before moving it.
● Move the UPS with caution to avoid bumping or toppling, which may damage
the UPS. After placing the case in the installation position, unpack it with
caution to prevent scratches. Keep the UPS steady during unpacking.
● If the UPS installation environment is in poor condition and the UPS needs to
be stored for a long time after it is unpacked, take measures to prevent dust. It
is recommended that the UPS be wrapped with the original plastic coat.
Procedure
Step 1 Use a pallet truck to transport the UPS cabinet to the specied place, unpack the
cabinet, and remove the screws that secure the UPS to the wooden pallet.
Figure 6-3 Unpacking
----End
6.2 Installing a Cabinet
6.2.1 Installation on the Floor
UPS5000-H-(400 kVA-600 kVA)
User Manual (100 kVA Power Module) 6 Installation
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 56