Huawei UPS5000-H Series - Bypass Module

Indicator Color Status Description
Blinking
at short
intervals
The module is not congured, the inverter
software and rectier software are being
upgraded, or the inverter software is being
upgraded (blinking at 4 Hz, on for 0.125s and
o for 0.125s).
O The software is being upgraded.
Alarm
indicator
Yellow Steady
on
A minor alarm is generated for the inverter or
rectier.
O There is no minor alarm for the inverter or
rectier, or the software is being upgraded.
Fault
indicator
Red Steady
on
A critical alarm is generated for the inverter or
rectier.
O There is no critical alarm for the inverter or
rectier, or the software is being upgraded.
Table 4-2
Specications
Item
Specications
Rated output capacity 100kVA/100kW
Dimensions (H x W x
D)
130 mm x 442 mm x 750 mm
Weight < 55 kg
4.2 Bypass Module
The UPS works in bypass mode under the following circumstances:
● The ECO mode is used and the bypass voltage is within the specied range.
● The power module overload times out.
● Both active and standby energy control modules (ECMs) in the system are
abnormal.
● The system runs abnormally.
● The UPS is transferred to bypass mode manually.
UPS5000-H-(400 kVA-600 kVA)
User Manual (100 kVA Power Module) 4 Component Description
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 27