Huawei UPS5000-H Series - Dry Contact Extended Card

Optional
Component
Model Function
Intelligent
detection card
- ● Detects the temperatures of UPS input
and output wiring terminals.
● Used for the optional switch cabinet
to detect the temperatures of the
input and output wiring terminals and
the status of each switch in the
cabinet.
Surge protection
box
- Improves the UPS surge protection
capability.
Surge protection
box subrack
- Installed when a surge protection box is
used.
Ambient
temperature
and humidity
sensor
- Monitors ambient temperature and
humidity.
Battery
temperature
sensor
- Monitors the battery temperature.
Copper bar
protection
component
- Protects copper bars.
Air lter - Prevents the UPS from dust.
Antiseismic kit - Reinforces the cabinet so that the cabinet
can resist intensity 9 earthquakes.
Parallel cable 5 m/10 m/15 m Connects UPSs in parallel.
BSC cable 5 m/10 m/15
m/60 m
Transmits bus synchronization signals in a
dual-bus system.
NO TE
The ECM extended subrack, surge protection box subrack, and intelligent detection card do
not support onsite installation. If you require the optional components, inform Huawei
when you purchase the UPS so that Huawei can install them before delivery.
5.2 Dry Contact Extended Card
The dry contact extended card provides ve groups of electric relay output ports
for dry contact signals and
ve groups of signal input ports to implement various
alarm and control functions as required.
A maximum of one dry contact extended card supported in the power monitoring
subrack. The card is hot swappable.
UPS5000-H-(400 kVA-600 kVA)
User Manual (100 kVA Power Module) 5 Optional Components
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 42