Huawei USG6000E Series - Page 336

Power Supply System
● Early delivery: The power supply system has two PAC1K2S12-B AC power
modules for 1+1 power redundancy.
● Later delivery: The power supply system has two PAC1K2S12-CB AC power
modules for 1+1 power redundancy.
Heat Dissipation System
The heat dissipation system consists of
ve FAN-036A-B modules working in 4+1
backup mode. From the front panel, the device provides a front-to-rear air ow.
The fan module locates at the air exhaust of the system.
Figure 4-135 System air ow of the USG6712E
Technical Specications
Table 4-138 Technical specications of the USG6712E-AC
Item
Specication
Installation Type Rack
Cabinet installation standard Cabinet with a depth of 800 mm or
above
Dimensions without packaging (H x W
x D) [mm(in.)]
43.6 mm x 442 mm x 600 mm (1.72 in.
x 17.4 in. x 23.62 in.)
Dimensions with packaging (H x W x
D) [mm(in.)]
225 mm x 590 mm x 790 mm (8.86 in.
x 23.23 in. x 31.1 in.)
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 329