Figure 4-190 Schematic diagram of the connection scheme of straight-
through cables
You can use straight-through cables to connect:
– A switch or hub with an USG6000E
– Computers (including servers and workstations) with a switch or hub
● Crossover cable
The crossover cable uses wiring scheme EIA/TIA T568A for one end and
EIA/TIA T568B for the other, as shown in Figure 4-191.
Figure 4-191 Schematic diagram of the connection scheme of crossover
cables
You can use the crossover cables to connect:
– Two USG6000Es
– An USG6000E and a computer
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 492
To Next Page
Loading...
