Distance Between
Front and Rear
Mounting Rails
Installation of Front Mounting Brackets, Rear
Mounting Brackets, and Rear Mounting Bracket
Guide Rails
697 mm to 835 mm
Step 2 Install
oating nuts and cabinet guide rails.
1. Determine the positions for installing the guide rails and
oating nuts, as
shown in Figure 5-20.
Install the two guide rails at the same height to ensure that the device is
level.
Figure 5-20 Positions of oating nuts
2. Install the oating nuts that match M6 screws at the positions marked in
Figure 5-20. Figure 5-21 illustrates how to install a oating nut.
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 539
To Next Page
Loading...
