Hypertherm MAXPRO200 - Placement of system components

38 MAXPRO200 Instruction Manual 807700 Revision 1
Specifications
Quick-disconnect torch – 428027 or 428028
• The torch mounting sleeve for the quick-disconnect torch is available with an outside diameter of
50.8 mm (2.0 inches) or 44.45 mm (1.75 inches)
• The minimum bend radius for the torch lead is 152.4 mm (6.0 inches)
1 435.33 mm (17.14 inches)
2 279.40 mm (11.00 inches)
3 76.98 mm (3.03 inches)
4 78.95 mm (3.11 inches)
5 12.70 mm (0.50 inches)
6 44.20 mm (1.74 inches)
7 46 degrees
8 57.15 mm (2.25 inches)
9 44.20 mm (1.74 inches)
7
6
5
4
3
2
1
8
9
1.45 kg
(3.20 lb)