Hypertherm Powermax 65 Operator's Manual

PARTS
6-10 powermax 65/85 Operator Manual
The entire machine torch and lead assembly can be replaced, or individual component parts can
be replaced. Part numbers starting with 083 and 087 indicate complete torch and lead assemblies.
Part number Description
083254* M65 Machine torch assembly with 15 ft (4.6 m) lead
083255* M65 Machine torch assembly with 25 ft (7.6 m) lead
083256* M65 Machine torch assembly with 35 ft (10.7 m) lead
083257* M65 Machine torch assembly with 50 ft (15.2 m) lead
083258* M65 Machine torch assembly with 75 ft (22.9 m) lead
083259* M65m Mini-machine torch assembly with 15 ft (4.6 m) lead
083260* M65m Mini-machine torch assembly with 25 ft (7.6 m) lead
083261* M65m Mini-machine torch assembly with 35 ft (10.7 m) lead
083262* M65m Mini-machine torch assembly with 50 ft (15.2 m) lead
083263* M65m Mini-machine torch assembly with 75 ft (22.9 m) lead
087092* M85 Machine torch assembly with 15 ft (4.6 m) lead
087093* M85 Machine torch assembly with 25 ft (7.6 m) lead
087094* M85 Machine torch assembly with 35 ft (10.7 m) lead
087095* M85 Machine torch assembly with 50 ft (15.2 m) lead
087096* M85 Machine torch assembly with 75 ft (22.9 m) lead
087097* M85m Mini-machine torch assembly with 15 ft (4.6 m) lead
087098* M85m Mini-machine torch assembly with 25 ft (7.6 m) lead
087099* M85m Mini-machine torch assembly with 35 ft (10.7 m) lead
087100* M85m Mini-machine torch assembly with 50 ft (15.2 m) lead
087101* M85m Mini-machine torch assembly with 75 ft (22.9 m) lead
228737 Kit: M65/M85 positioning sleeve
228738 Kit: M65/M85 removable gear rack
228735 Kit: M65/M65m/M85/M85m front mounting sleeve
* The torch assembly also includes one set of the shielded consumables listed on page 6-12.

Hypertherm Powermax 65 Specifications

General

Open Circuit Voltage (OCV)	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Maximum Cut Capacity (Mild Steel)	1" (25 mm)
Input Voltage	200-600 V, 1/3-PH, 50/60 Hz
Output Current	20 – 65 A
Duty Cycle	50% @ 65 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Torch Lead Length	25 ft (7.6 m)
Maximum Cut Capacity (Aluminum)	5/8" (16 mm)
Severance Cut Capacity (Mild Steel)	1-1/4" (32 mm)
Maximum Severance Thickness	1-1/4 in (32 mm)
Gas Type	Air/Nitrogen
Torch Options	Hand Torch, Mechanized Torch