Hypertherm Powermax 65 Operator's Manual

PARTS
powermax 65/85 Operator Manual 6-15
The label kits include the consumable label, appropriate safety labels, as well as front and side
decals. The consumable and safety labels are pictured on the next page.
Powermax65/85 labels
Part number Description
223206 Kit: 85 A Work lead with magnet clamp, 25 ft (7.5 m)
223207 Kit: 85 A Work lead with magnet clamp, 50 ft (15.2 m)
223208 Kit: 85 A Work lead with magnet clamp, 75 ft (22.9 m)
223209 Kit: 85 A Work lead with ring terminal, 25 ft (7.5 m)
223210 Kit: 85 A Work lead with ring terminal, 50 ft (15.2 m)
223211 Kit: 85 A Work lead with ring terminal, 75 ft (22.9 m)
229370 Kit: Powermax65/85 Wheel kit assembly
Part number Description
228649 Kit: Powermax65 labels, CSA
228650 Kit: Powermax65 labels, CE
228651 Kit: Powermax85 labels, CSA
228652 Kit: Powermax85 labels, CE

Hypertherm Powermax 65 Specifications

General

Open Circuit Voltage (OCV)	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Maximum Cut Capacity (Mild Steel)	1" (25 mm)
Input Voltage	200-600 V, 1/3-PH, 50/60 Hz
Output Current	20 – 65 A
Duty Cycle	50% @ 65 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Torch Lead Length	25 ft (7.6 m)
Maximum Cut Capacity (Aluminum)	5/8" (16 mm)
Severance Cut Capacity (Mild Steel)	1-1/4" (32 mm)
Maximum Severance Thickness	1-1/4 in (32 mm)
Gas Type	Air/Nitrogen
Torch Options	Hand Torch, Mechanized Torch