Hytera PDC760 - 2.5 Switching the Communication Mode; 2.6 Switching the Work Mode

16

Recording screen operations
 In the control and notification center, tap Screen Recorder.
 Press the preprogrammed Screen recording key.

Recording ambient sounds
During screen operation recording, the microphone is disabled by default.
To record ambient sounds, tap , go to Assistance > Screen recording > Audio source, and then
tap Microphone.
Inverting the Top Screen
You can change the orientation of the top screen for clear and fast access to the information. Do either of the
following:

Press the preprogrammed Invert top screen key.

In the control and notification center, tap Invert top screen.
Ending Recently Used Apps
You can end the recently used apps to release the storage space.
Double press the Home key to enter the recently used apps interface. Do either of the following:

To end a running app, tap , swipe left, or swipe right.

To end all running apps, tap .
2.5 Switching the Communication Mode
Upon power-on, the radio automatically enters broadband & narrowband mode.
To switch to narrowband mode, long press the On-Off/End key, and then tap Broadband off.
To switch back to broadband & narrowband mode, long press the On-Off/End key, and then tap Broadband
on.
2.6 Switching the Work Mode
Tap .
Under the Basic settings pane, tap Work mode.
Tap Conventional, DMR trunking, or MPT trunking.