40
4.6.1 Pairing a BT Device
Enable the BT feature by doing either of the following:
Tap , and then tap BT under the Wireless & networks pane.
In the control and notification center, tap the control widget of BT.
The radio automatically detects available BT devices, and other BT devices can also detect the radio.
Tap the name of the BT device.
Wait for the BT device to respond to the BT pairing request.
After the BT device accepts the BT pairing request, the radio can exchange information (e.g., files, photos,
and videos) with the BT device.
You can tap following the device, and then tap
to forget the paired device.
4.6.2 Sending and Receiving Files
Many apps support data transfer through the BT. Take Gallery as an example.
To send photos or videos through the BT, do as follows:
Tap .
Touch and hold the picture or video, tap Share, and then tap BT.
Tap the BT device from the available BT device list.
(Optional) To check the sending process, in the control and notification center, tap BT Share.
When other devices request for sending files, you must accept the request before receiving the files.
4.6.3 BT Location
The BT Location feature is an indoor positioning technology based on BT 4.0. After detecting the beacon
information broadcast by the BT beacon, the radio sends the location information to the BT location data
center through the public network.
With the BT enabled, tap , go to BT location > Broadband BT location, and then you can do one of the
following:
To refresh the beacon information every five seconds or stop refreshing, tap Refresh or Stop.
To report the location, tap Location report.
To Next Page
Loading...
