50
The service initiator presses the preprogrammed Emergency off key (long press TK by default).
The call duration exceeds the preset time.
The BS signal is lost.
With the Clear Down feature enabled, the calling party changes the contact.
In the case of an emergency group or all call, the called party can only exit the call, and can rejoin
the call later.
5.8 Location Report
The Location Report feature allows the radio to report its location information to the dispatch station or
trunking system.
To report the location information, do either of the following:
Press the preprogrammed Location report key.
Request your dealer to configure the Location Report trigger as power-on/off, preset time, or distance
interval.
The radio automatically reports the location information according to the trigger.
5.9 Stun, Revive, and Kill (Trunking Only)
When the radio is stunned by the dispatch station or trunking system, both the top and main screens display
the icon . In this case, the radio cannot initiate or receive any network service (including calls and short
messages), but retains features such as registration, revive, authentication, power-on/off, and lock screen.
To restore normal use, request the dispatch station or trunking system to send a revive command.
When the radio is killed by the dispatch station or trunking system, both the top and main screens display
the icon . In this case, the radio is incapable of any function except power-on/off. To restore normal use,
send the radio back to the Company.
The Stun, Revive, and Kill features are enabled by your dealer by default.
To Next Page
Loading...
