Hytera PDC760 - 5.10 Other Services

51
5.10 Other Services
Conventiona
l Mode
Feature
Description
Operation
Digital
Channel
Alert Call
This feature allows you to send a call
alert to a private contact. After seeing
the alert, the contact can call you back.
This feature is enabled by default.
To initiate a service, do
either of the following:

Tap or ,
tap the contact from
the Favorites or
Private contact list,
and then tap the
service.

Press the
preprogrammed One
touch call/msg key.
Radio Check
This feature allows you to check
whether a private contact's radio is
powered on or operating on a channel
without disturbing the contact. This
feature is enabled by default.
Remote
Monitor
This feature allows you to remotely
activate the microphone of a private
contact's radio to monitor its activities.
This feature is enabled by your dealer.
Radio
Disable/Enable
The Radio Disable feature allows you to
send a command to disable the radio of
a private contact. The disabled radio
can be monitored remotely, but cannot
use other features. To restore the
disabled radio to normal use, send a
Radio Enable command. These two
features are enabled by your dealer.
Priority
Interrupt
This feature allows you to interrupt the
ongoing call on the current channel to
release it. Then you can initiate a new
call or a new data service on that
channel. This feature is enabled by your
dealer.
To interrupt a call, do one
of the following:

Initiate an emergency
call.

Initiate an all call.

Send a Radio Disable
command.

Send a short message.