48
5.6 One Touch Call/ Message
The One Touch Call/Message feature allows you to quickly initiate a preset service.
The following table shows the services that can be implemented by this feature and the corresponding
operations.
Conventional
Mode
On a digital channel, you can do any of the
following:
Initiate a group, private, or all call.
Send a text message or location information to
a private or group contact.
Initiate an alert call, radio check, remote
monitor, radio enable, or radio disable service.
For call services on a digital
channel, press the One
Touch Call/msg key, and
then press and hold the PTT
key.
For other services, press the
preprogrammed One touch
call/msg key.
Trunking
Mode
Initiate a group, private, broadcast, or
PSTN/PABX call.
Send a text, status, or user-defined message to a
private or group contact.
5.7 Emergency
The Emergency feature allows you to seek help from your companion or the control center in case of
emergency. With the highest priority, you can initiate an emergency service even when your radio is
transmitting or receiving.
In emergency mode, the radio transmits at high power level by default. The following table describes
different types of emergency services that you can use.
Siren Only
The radio emits a siren, but does not transmit any emergency signal to the control
center.
Regular
The radio gives visible and audible indications.
Silent The radio gives no visible or audible indication.