Hytera PDC760 - 3.1.2 Private Call

20
Press and hold the PTT key or tap .
Through One Touch Call
With the One Touch Call feature enabled, do either of the following:

In trunking mode, press the preprogrammed One touch call/msg key.

In conventional mode, press the preprogrammed One touch call/msg key, and then press the PTT key.
Receiving a Group Call
You can answer a group call without any operation.
Managing a Group Call
During a group call, the calling party can perform the following operations:

To record the call, tap .

To switch to the conversation interface, tap .

To obtain or send location information, tap to access the positioning interface.
Ending a Group Call
Conventional Mode
A group call automatically ends when the call hang time expires.
Trunking Mode
A group call ends in one of the following cases:

The calling party taps or presses the On-Off/End key.
If the called party presses the On-Off/End key, the called party exits the call, and can rejoin the call later.

The call hang time expires.

The call duration exceeds the preset time.

The base station (BS) signal is lost.

A pre-emptive call or an emergency call occupies the channel.

The calling party changes the contact with the Clear Down feature enabled.
3.1.2 Private Call
A private call is a call from an individual user to another individual user.