Hytera PDC760 - 3.4.2 Phone Contacts

33

If the calling party and the called party enable
Auto-add contacts
and
Send talker alias
, the
called party automatically adds the calling party to the contact list when receiving the call.
Managing the Zones/Subgroups
Zone
In conventional mode, a zone is a group of channels within the same operational area.
Tap or , and then tap Zone. You can do either of the following:

Switching the channel
a. Select the zone folder.
b. Tap to set the channel as the current channel.

Editing the channel
a. Tap the channel, and then tap to do either of the following:
 For the digital channel, edit Roam list, Scan list, Contact, RX group list, and TX power.
 For the analog channel, edit Scan list, TX power, and Squelch level.
b. Tap .
Subgroup
In trunking mode, a subgroup consists of multiple groups or private contacts.
To switch the current contact, do as follows:
Tap or , and then tap Subgroup.
Tap the subgroup.
Tap to set the contact as the current contact.
3.4.2 Phone Contacts
Searching for a Contact
Tap , and then tap to enter the contact name or its initial in the search box.
The radio displays the search results below the search box.
Sharing a Contact

Through Messaging app