27
higher priority.
To set the priority level of the group, do either of the following:
Tap , tap Priority groups under the Contacts settings pane, and then set the group contacts to
priority level 1, 2, or 3.
A larger number represents a higher priority.
Tap or , tap Contacts, and then tap the group contact to access the contact details interface.
3.1.11 Call Forwarding (Trunking Only)
The Call Forwarding feature allows you to forward calls to another radio when your radio malfunctions,
powers off, or cannot answer calls. This ensures smooth communications.
With the Call Forwarding feature enabled by your dealer, tap , go to Call forwarding, enable Voice
forwarding, and then set the private ID or PSTN/PABX number to receive the calls.
3.1.12 Call Queuing
When all channels of the trunking system are busy, the call initiated by the radio will be placed in a queue.
After a channel becomes idle and the trunking system allocates the channel to the call, the call can be
established. During queuing, both the top screen and the main screen displays "Call queued". With the Clear
Down feature enabled by your dealer, you can hang up to cancel queuing and end the call. This feature is
enabled by default.
3.1.13 Call on Analog Channel
You can initiate a call to all the other users on an analog channel.
To initiate such a call, press and then rotate the Smart Knob to select the channel, and then press and hold
the PTT key. You can answer a call on an analog channel without any operation.
3.1.14 TOT
The Time-out Timer (TOT) feature allows the radio to automatically stop transmission and keep beeping
when the preset transmission period (60s by default) in a group or private call expires. To stop beeping,
release the PTT key. To initiate a group or private call again, press and hold the PTT key after the preset time.
This feature is enabled by default to prevent the calling or the called party from occupying the channel for a
long time.
To Next Page
Loading...
Need help?
General
