55
6.3 Lone Worker
The Lone Worker feature allows the radio to automatically send an emergency alarm to your companion or
the control center in either of the following scenarios:
You do not operate the radio within the preset time.
The radio does not transmit voice within the preset time.
You can press the keys, rotate the knob, or transmit voice to exit the emergency mode.
To enable this feature, do either of the following:
Tap , tap Security under the Personal pane, and then tap Lone worker.
Press the preprogrammed Lone worker key.
This feature is applicable only to radios that support the Emergency feature.
This feature is configured by your dealer.
6.4 SIM Card Lock
The SIM card lock allows you to lock the SIM card with the PIN number. If you restart, install or uninstall the
SIM card, or replace the radio, you must enter the PIN number to unlock the SIM card.
1.
Tap , tap Security under the Personal pane, and then tap Set up SIM card lock.
2.
In the SIM card lock settings interface, tap Lock SIM card, and then enter the PIN number.
If needed, tap Change SIM PIN to change the PIN number.
Contact the carrier for the PIN number and PUK number of the SIM card.
If you enter an incorrect PIN number more than the maximum times, you need to enter the
PUK number to unlock. If you enter an incorrect PUK number more than the maximum times,
the SIM card becomes invalid.
To Next Page
Loading...
