Scanning FM/AM broadcast
frequency
1. Press the button.
●
Scan (less than 0.8 second) :
Scans all frequencies and plays
only frequencies with superior
reception for 5 seconds each.
●
Preset Scan (over 0.8 second):
Scans the 6 frequencies stored
as preset frequencies in the
current band for 5 seconds
each.
2. Press the button again
to continue listening to a fre-
quency. The scan will be termi-
nated and the current fre-
quency will continue to be
played.
Scan
Scan
9
Selecting a broadcast fre-
quency through manual
search
Turn the knob on the con-
trol panel in clockwise or counter-
clockwise direction.
Each click on the knob will
increase or decrease the frequen-
cy by 1 step (FM: 0.2 MHz, AM: 10
kHz).
Storing FM/AM preset
Storing manually
1. Select the desired frequency.
2. Press the preset button for
over 0.8 second. The frequen-
cy will become stored along
with a beep sound.
Auto Preset
After selecting the desired band,
press the button.
The 6 frequencies with the most
superior reception will be stored
as preset buttons in correspon-
ding order.
Auto preset
TUNE
TUNE
Operating the FM/AM radio
8
To Next Page
Loading...
Need help?
General
