2-6 AUDIO SYSTEM
PART 2 AUDIO SYSTEM
Listening to the XM radio
1. Press the key on the control panel.
The XM radio band screen of the most
recent listened station will be displayed.
2. Press the
key to change the desired
radio band. Each press will change the
bands in the following order: XM1
→
XM2
→
XM3
→
XM1
3. Select the desired broadcast channel.
[Selecting XM broadcast channel], page
2-7.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"XM"
"XM <1 or 2 or 3>"
"XM Channel <0 to 255>"
"XM <1 or 2 or 3> Preset <1 to 6>"
XM screen and functions
1
Mode display : displays the XM1/XM2/
XM3 modes.
2
SCAN/PRESET SCAN indicator : if SCAN/
PRESET SCAN is operating, the switch is
displayed.
3
Channel number : displays the current
playing channel.
4
Channel mode indicator : displays the
channel mode in orange.
5
Category mode indicator : displays the cat-
egory mode in orange.
6
Channel name : displays the channel
name.
7
NAME : displays the artist and other relat-
ed information.
8
Title name : displays the title name.
9
Category name : displays the category
name.
a
Preset
buttons : the desired channel can
be preset and selected.
[Storing XM
preset], page 2-9.
b
Mode
buttons : switches between
channel mode and category mode.
[Switching the XM mode], page 2-7.
c
List
button : displays the channel or
category list.
[Selecting XM broadcast
channel], page 2-7.
1
4
5
b c d e f
6
7
8
9
2
3
XM radio
a
To Next Page
Loading...
Need help?
General
