2-16 AUDIO SYSTEM
PART 2 AUDIO SYSTEM
Setting Random function for CD
music
Press the
Random
button. Each press will
change the function in the following order:
RANDOM
→
RANDOM OFF
→
RANDOM
* RANDOM : plays all tracks in the disc in ran-
dom order.
Voice Command
1. Press the
key
on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Random"
Say "Random" or "Random Folder" again or
say "Normal Play" in order to terminate the
set Random function.
Scanning CD track
1. Press the
Scan
button. Each press will
change the function in the following order:
SCAN
→
SCAN OFF
→
SCAN.
* SCAN : scans all tracks in the disc for 9 sec-
onds each.
Voice Command
1. Press the
key
on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Scan"
Say "Normal Play" in order to terminate the
set Scan function.
2. Press the
Scan
button again to continue
listening to the track. The scan will be termi-
nated and the current track will continue to
be played.
INFORMATION
When scanning has completed an entire revo-
lution, the scan function is automatically ter-
minated and the previous played track will be
restored.
To Next Page
Loading...
Need help?
General
